Open top menu
الخميس، 23 فبراير 2012

Install ANY version of Windows 7 by making your own USB install drive

Install ANY version of Windows 7 by making your own USB install drive

Microsoft had recently released a utility that allowed you to make a USB memory stick to install Windows 7 on computer’s that did not have a DVD drive. However Rafael Rivera of the “Within Windows” blog pointed out that the tool contained some GPL v2 licenced code and Microsoft have now quickly removed it from their web site. UPDATE: Microsoft has admitted that they violated the GPL v2 licence and have now released the tool under open source. In any case the instructions below show you how to build a much better bootable USB install memory stick that allows you to install ANY version of Windows 7.
If you have bought multiple version of Windows 7 and compared the DVD’s you might have noticed that they are the same with the exception of one file (ei.cfg). This one file tells Windows what version to automatically install during the install process. Because all the DVD’s are essentially the same you can use any Windows 7 DVD to perform a version upgrade of Windows 7 using the “Upgrade Anytime” option.
Now to make this bootable universal Windows 7 install USB memory stick you will need at least one Windows 7 DVD 32bit or 64bit depending on what version you want to install and a blank 4gb USB memory stick. Note you will need to create a separate 32 or 64bit USB memory stick of Windows 7 but it will let you install the different SKU’s.
Step 1. Insert the Windows 7 DVD into your computer and the USB memory stick into your computer
Step 2. Open an “Command Prompt” and run “DISKPART”.
usb1
This will launch the diskpart utility in a separate windows and perform a UAC prompt.
Step 3. Type “LIST DISK” and take note what the disk number is of the USB memory stick. This will be the same size as the USB memory stick (eg. 3824 MB = 4 GB).
usb2
Step 4. Then type “SELECT DISK X” where X is the disk number of the USB memory stick.
usb3
Step 5. Type “CLEAN”. Warning – This will wipe all data from the USB memory stick.
usb4
Step 6. Type “CREATE PARTITION PRIMARY”
usb5
Step 7. Type “SELECT PARTITION 1”
usb6
Step 8. Type “ACTIVE”
usb7
Step 9. Type “FORMAT FS=FAT32” (and wait about 5 minutes depending on the size and speed of the USB memory stick)
usb8
Step 10. Type “ASSIGN”.
usb11
You will notice the auto play window now appears. Take note of the drive letter (e.g. F:\ ) and close this window.
usb12
Step 11. Type “EXIT”
Step 12. Back at the command prompt type “xcopy d:*.* /s/e/f F:” where D: is the drive letter of you DVD and F: is the drive letter of your USB Memory stick.
usb13
Don’t worry if it takes a long time to copy boot.wim and install.wim as these are the two largest files on the DVD.
usb15
Step 13. Once the xcopy is finished  run “del F:\sources\ei.cfg” from the command prompt and you Windows 7 Bootable USB memory stick is ready to go. Doing this step is what makes the USB memory stick allow you to install any version of Windows 7 as it no longer has a default version configured.
usb18
You can now either boot from the USB memory stick or just run setup.exe from the drive to start the install process. Either way you will now prompted for the version of Windows 7 you want to install.
usb17a
Warning: This procedure will allow you to install a copy of Windows 7 that you are not licenced to have. Therefore you need to be very careful to only select a version that you have a licence key for as you will not be able activate Windows without a key that exactly matches the version you have installed.
Tagged
Different Themes
Written by Lovely

Aenean quis feugiat elit. Quisque ultricies sollicitudin ante ut venenatis. Nulla dapibus placerat faucibus. Aenean quis leo non neque ultrices scelerisque. Nullam nec vulputate velit. Etiam fermentum turpis at magna tristique interdum.

0 التعليقات